Quick Install Isolation Rooms

PortaFab Modular Building Systems are an ideal solution for quickly creating temporary, semi-permanent, and permanent isolation rooms within hospitals and medical centers. As a Clean Build alternative to traditional construction, PortaFab’s pre-engineered systems require minimal onsite cutting and fabricating which minimizes contamination threats and helps comply with Class IV ICRA guidelines.


Quick Install 
Clean Build

Dustless, Clean Installation
 

What is an Airborne Infection Isolation Room?

Also known as negative pressure isolation rooms, airborne infection isolation rooms (AIIR) are used by patients for hospitals and medical centers to prevent cross-contaminations and airborne infections from spreading throughout the facility.

These rooms are commonly recommended by the Center for Disease Control and Prevention (CDC) to help protect the public from diseases and infections that spread easily like tuberculosis, measles, and the coronavirus (COVID-19).

  • Central or point-of-use HEPA filters capable of removing particles 0.3 μm in diameter for supply (incoming) air
  • Well-sealed rooms
    • - Proper construction of windows, doors, and intake and exhaust ports
    • - Smooth, cleanable ceiling tiles
    • - Walls sealed above and below the ceiling
  • Ventilation to maintain ≥12 ACH
  • Directed air flow: design that filters air into one side of room, across patient’s bed and then exits on opposite side of room
  • Self-closing door on all room exits
  • Back-up ventilation equipment

 

Download Brochure

Negative Pressure Isolation Room
 
decorative clean air illustration

PortaFab Clean Build System

Fast & Easy to Install 

Pre-engineered systems can be assembled quickly with minimal training.

Dustless, Clean Installation

Minimal on-site construction and fabrication.

Easy to Clean

Smooth, uniform wall surfaces allow for easy disinfection.

Easy to Configure

Modular components allow for unlimited design potential.

Versatile

Easily expand, relocate or reuse to adjust to changes in demand.

Class "A" Material

Tested in accordance with ASTM E-84 requirements for flame spread and smoke density.

PE Stamped Drawings

Meet stringent construction guidelines including California seismic requirements.

Sound Deadening

Sound attenuation foam core reduces sound transmission.

Our Wall Systems

PortaFab offers two modular cleanroom systems that can be utilized to help facilities meet these strict CDC standards for negative pressure airborne infection isolation rooms and requirements for ICRA Class IV healthcare construction and renovation projects.

FabLine Wall Systems

F2000 (Gasketed)

PortaFab’s F2000 gasketed wall system is ideal for creating tightly sealed space while still featuring a non-progressive design that allows walls to be relocated without the need to remove adjacent panels, framing studs or ceiling panels.

  • The F2000 system can be outfitted with durable, aluminum-faced wall panels.
  • Maximum Height:  12’
Series 300 Wall System

Series 300

Our Series 300 wall system features an anodized aluminum stud construction that provides the quality, appearance and cost savings that make conventional construction obsolete. The non-progressive, post-and-panel design provides maximum versatility and relocatability.

  • The Series 300 system can be outfitted with our Aluminum-Faced, Class A, Fire & Sound panels for added performance in healthcare applications.
  • Maximum Height:  17’
 
decorative illustration of clipboard with medical symbol

Integrated Isolation Room Components

isolation room wall

Walls

PortaFab’s systems utilize aluminum-faced, class A wall panels that are easy-to-clean, non-combustible and provide excellent sound control.

isolation room door

Doors

PortaFab’s heavy duty wall systems can accommodate a wide variety of heavy-duty, hospital-grade doors including anti-microbial, stainless steel doors, impact doors and sliding doors for sealing off entire areas.

isolation room window

Windows

Multiple window units can be seamlessly integrated into isolation walls including our flush and beveled windows that allow for easy cleaning by eliminating hard-to-clean edges that collect, particles and more.

isolation room wall coving

Coving

Radius coving is used to create fully flush corner transitions and seamless wall-to-ceiling and wall-to-floor connections. By eliminating corners, the radius coving system allows for total "cleanability." Wall-to-wall and wall-to-ceiling junctions can be trimmed with an extruded coving that features a large 3" radius.

Portable HEPA filter for Isolation Room

HEPA Filter Units

Rooms can be outfitted with ceiling-mounted fan filter units that are integrated into existing mechanical systems, wall mounted systems or even portable systems like Envirco's Hospi-Gard™ IsoClean™ system shown here.

gasketed ceiling grid system

Gasketed Ceiling Grid System

PortaFab wall systems integrate seamlessly with our gasketed, heavy-duty ceiling grid that can support fan filter units, diffusers and light fixtures. The ceiling system creates an air-tight barrier between the space and ceiling plenum to prevent transmission of contaminants into the room.

 
decorative booth roofing diagram

Get a Quote Today

 

Allow PortaFab to assist you with the design, construction and installation of a negative pressure airborne infection isolation room that follows the strict standards set forth by the Center for Disease Control and Prevention organization.

Find a Local Contractor

Request a Quote Online

isolation room